Citation data is made available by participants in Crossref's Cited-by Linking service. For a more comprehensive list of citations to this article, users are encouraged to perform a search inSciFinder.
Preparation and Characterization of Exfoliated PHBV Nanocomposites to Enhance Water Vapor Barriers of Calendared Paper
Industrial & Engineering Chemistry Research201554 (45), 11277-11284
Abstract | Full Text HTML | PDF | PDF w/ Links
Chloroform induces outstanding crystallization of poly(hydroxybutyrate) (PHB) vesicles within bacteria
Analytical and Bioanalytical Chemistry201790,
Polyhydroxyalkanoates in the Food Packaging Industry
Polyhydroxyalkanoates: Biodegradable Plastics and Their Applications
Abhilasha SinghMathuriyaJ. V.Yakhmi
Influence of polyethylene glycol (PEG) chain length on the thermal behavior of spin-coated thin films of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/PEG blends
Journal of Molecular Structure20161124, 159-163
Dense stable suspensions of medium-chain-length poly(3-hydroxyalkanoate) nanoparticles
Benjamin A.PeprahJuliana A.RamsayBruce A.Ramsay
European Polymer Journal201684, 137-146
Stability of Aqueous Suspensions of Medium-Chain-Length Poly-3-Hydroxyalkanoate Particles
Journal of Polymers and the Environment201624 (3), 281-285
Bio-Based Coatings for Paper Applications
Coatings20155 (4), 887-930
Bacterial polyhydroxyalkanoates-eco-friendly next generation plastic: Production, biocompatibility, biodegradation, physical properties and applications
Green Chemistry Letters and Reviews20158, 56-77
Effect of crystallization conditions on the physical properties of a two-layer glassine paper/polyhydroxybutyrate structure
SalmanSafariTheo G. M.van de Ven
Journal of Materials Science201550, 3686-3696
Biopolymers for surface engineering of paper-based products
Properties and paper sizing application of waterborne polyurethane emulsions synthesized with isophorone diisocyanate
Progress in Organic Coatings201477, 988-996
Enzyme and metabolic engineering for the production of novel biopolymers: crossover of biological and chemical processes
Current Opinion in Biotechnology201324, 1054-1060
Wetting and hydrophobic modification of cellulose surfaces for paper applications
Journal of Materials Science201348, 6455-6498
Recent Advances in the Production, Recovery and Applications of Polyhydroxyalkanoates
A. M.GumelM. S. M.AnnuarY.Chisti
Journal of Polymers and the Environment201321, 580-605
Effects of carbon substrates on biodegradable polymer composition and stability produced by Delftia tsuruhatensis Bet002 isolated from palm oil mill effluent
Polymer Degradation and Stability201297, 1224-1231
Waterborne polyurethane/poly(n-butyl acrylate-styrene) hybrid emulsions: Particle formation, film properties, and application
Progress in Organic Coatings201274, 248-256
Combining renewable gum rosin and lignin: Towards hydrophobic polymer composites by controlled polymerization
JifuWangKejianYaoAndrew L.KorichShigengLiShuguoMaHarry J.PloehnPeter M.IovineChunpengWangFuxiangChuChuanbingTang
Journal of Polymer Science Part A: Polymer Chemistry201149, 3728-3738
Polyhydroxyalkanoates (PHAs) for food packaging
Turning polysaccharides into hydrophobic materials: a critical review. Part 1. Cellulose
We recently wrote a blog called “Everything You Need to Know About Bioplastics” and now we’d like to expand on the topic by focusing on PHAs. Polyhydroxyalkanoate may be a term you have heard but aren’t necessarily familiar with. As a design and engineering firm that has extensive experience with various plastics and the injection molding process, the future of plastics is very important to the consumer products, food and beverage, and packaging industries, all of whom we have worked with at some point. Let’s discuss what exactly PHA is, some of its general characteristics, and applications that can or do utilize PHAs.
What is PHA?
PHA stands for polyhydroxyalkanoate, which represents a polyester made in the natural world (as opposed to synthetic polyester). Well, what is a polyester? Let’s back up even further to get a better understanding:
- A monomer is a small molecule that chemically binds itself to other molecules.
- A polymer is a large molecule made of repeating smaller units (monomers) that is natural, synthetic, or both. The process in which smaller molecules become larger molecules is called polymerization. Qualities and characteristics like rigidity, heat tolerance, malleability, and molecular structure vary greatly. Examples of natural polymers are shellac, silk, and natural rubber. Common synthetic polymers include polyvinyl chloride (PVC), neoprene, and synthetic rubber.
- Polyester is a class of polymers that contains ester in its main functional group (which means that at least one hydroxyl group is replaced with an alkoxy group). Polyesters are widely used in the clothing and textile industries, as well as packaging, consumer goods, and more. Polyesters may be thermoplastic or thermoset (the former means that a polymer can be melted and reformed multiple times at its melting temperature, while the latter can only be heated and formed once; if it is heated beyond a certain point, it will then burn instead of melt).
- Polyhydroxyalkanoates are a class of natural (not synthetic) polyesters that are derived from bacterial fermentation. Basically, microorganisms synthesize polyesters in nutrient-deficient conditions, and these PHAs can then be harvested. PHAs are both bio-based and biodegradable (more on these definitions below).
What are the general characteristics of PHAs?
Plastics in general are nearly impossible to nail down as having certain characteristics. Even within a group such as polyesters, there can be a wide variety of thermal, mechanical, and other qualities present. That being said, polyhydroxyalkanoates do share some general characteristics as a group. In their 2014 paper “Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing, and potential applications in packaging,” Bugnicourt, Cinelli, Lazzeri, and Alvarez list the following characteristics of PHAs:
- Water insoluble and relatively resistant to hydrolytic degradation.
- Good ultraviolet resistance but poor resistance to acids and bases.
- Soluble in chloroform and other chlorinated hydrocarbons.
- Biocompatible and hence suitable for medical applications.
- Sinks in water, facilitating its anaerobic biodegradation in sediments.
- Less ‘sticky’ than traditional polymers when melted.
PHAs are also somewhat unique in that they are both bio-based and biodegradable, as mentioned above. “Bio-based” is a very broad term that basically means a substance was derived from an organic (usually plant-based) source, whether wholly or in part. Bio-based plastics are distinguished from much more common petroleum-based polymers (visit our Plastics page to learn more about conventional types of plastics). PHAs in particular are made naturally by specific bacteria, such as Pseudomonas putida and Cupriavidus necator. Although many would assume that anything “bio-based” is biodegradable, this is not the case.
Whether a plastic is biomass- or petroleum-based is a different question than whether it will biodegrade (a process by which microbes break down material if conditions are suitable). Technically, all materials are biodegradable, but for practical purposes, only those that degrade within a relatively short period of time (weeks to months, usually) are considered biodegradable. PHAs fall into the biodegradable category; they will decompose whether they are exposed to soil, compost, or marine sediment. This makes them especially useful for applications like single use packaging.
What are the benefits of bioplastics and PHAs in particular?
PHAs (and bioplastics in general) are very attractive materials for three primary reasons: they can be created from renewable sources, they can also biodegrade, and they are biocompatible. To the first point, it is very exciting that scientists are finding ways to harvest and utilize material from sources like bacteria synthesis (PHA) and corn or sugarcane (other bioplastics like PLA). Previously, crops had to be diverted for the production of bioplastics, but in the last decade or so, there has been a focus on using waste materials (such as banana peels, potato peelings, etc) to produce bioplastics instead. By utilizing waste products, use of scarce resources can be maximized.
Biodegradability is the other key aspect that makes PHAs a very promising material. Environmental pollution is a hot topic with important implications; conventional petrochemical-based plastics have been at the very center of the controversy, primarily because they are so widespread and do not degrade easily. For instance, images of marine animals strangled by or ingesting various plastics show the stark reality of pollution. Of course, fossil-fuel based plastics have done much to improve the material lives of humans, but when it comes to pollution, new innovations in biodegradability are very welcome.
Because PHAs are biocompatible (which means not harmful to living tissue), they can and have been utilized in a variety of medical and surgical applications. Looking forward, the potential also exists that PHAs will be involved in “wearable” internal technology applications.
What applications have utilized or can utilize PHAs?
Polyhydroxyalkanoates have a great variety of characteristics, and their sustainability, biodegradability, and biocompatibility mean that many industries would benefit from utilizing them further. Here are some applications in which PHAs have become very useful:
- Single use packaging for foods, beverages, consumer products, etc
- Medical applications like sutures, bone marrow scaffolds, bone plates, etc
- Agricultural foils and films
Do you have questions about plastics or how they are considered in design and engineering?
Creative Mechanisms is a premiere design and engineering firm with unique expertise in plastics. Our design team is skilled at creating custom solutions to complex problems, and designing for any number of objectives, such as manufacturing, assembly, aesthetics, and more. We have experience working with many materials, and are incredibly familiar with injection molding, CNC machining, and 3D printing. Please visit our Client Testimonial page to review what previous and current customers have said about our work - we think you’ll be impressed.
To learn more about conventional plastics, visit the plastics page, or review the many resources we’ve compiled here. Thank you for reading, and please reach out if you have any questions!